MPM series have a powerful holding force up to 150N/cm2 and it could be used on heavy duty turning process.
Pole pitch：3+12mm
Holding force: 150N/cm2
Magnetic field depth：8mm
Wearing limit: 8mm
Permanent magnetic chuck have a standard option of allen wrench and 2 chuck clamps. It could be easily installed on the machine worktable with screws.
MAG: Switch the wrench 180 degree from “OFF” to “ON” phase, and workpieces could be hold by invisible but powerful magnetic force. Copper stopper on 2 sides could help to prevent workpiece from sliding on the chuck.
DEMAG: Switch the wrench 180 degree from “ON” to “OFF” phase, and workpieces could be released.
Dia 100~400 is the popular size for most of the situation. But Dia 500 or 600mm could be also produced on special request.
Loop line could also be added to locate the accurate position of ring sharp workpieces.
| Model | Diameter (mm) | Thickness (mm) | Weight (kg) | Pole pitch (mm) |
|---|---|---|---|---|
| MPM-130 | 130 | 56 | 5 | 3+12 |
| MPM-160 | 160 | 56 | 8 | 3+12 |
| MPM-200 | 200 | 56 | 13 | 3+12 |
| MPM-250 | 250 | 56 | 20 | 3+12 |
| MPM-300 | 300 | 56 | 29 | 3+12 |
5-sided machining is possible in one clamp
Energy saving, no electric power supply during clamping
Workpieces larger than table surface are machinable
Reduced consumption of tools
Improved finishing and greater accuracies
More convenient and high efficiency
Milling
Grinding
Boring
Drilling
Standard Accessories—
1 set of PPM chuck
2 side stopper
2 pcs of chuck clamps
1 allen wrench
Instruction manual
Quality report
Option accessories—
Pole extensions
Customized poles pitch
