FPM series have a powerful holding force up to 100N/cm2 and it could be used on surface grinding process and EDM process.
Pole pitch：0.5+1.5mm(pole pitch 1+3mm are also available)
Holding force: 100N/cm2
Magnetic field depth：6mm
Wearing limit: 6mm
Permanent magnetic chuck have a standard option of allen wrench and 2 chuck clamps. It could be easily installed on the machine worktable with screws.
MAG: Switch the wrench 180 degree from “OFF” to “ON” phase, and workpieces could be hold by invisible but powerful magnetic force. Copper stopper on 2 sides could help to prevent workpiece from sliding on the chuck.
DEMAG: Switch the wrench 180 degree from “ON” to “OFF” phase, and workpieces could be released.
FPM series are also widely on EDM (electric discharge machining). The excellent waterproof structure could prevent it from corrosion of coolant oil and water.
Another reason is its low magnetic depth won’t magnetizing spark head.
| Model | Length (mm) | Width (mm) | Thickness (mm) | Weight (kg) | Pole pitch (mm) |
|---|---|---|---|---|---|
| FPM-1018 | 180 | 100 | 56 | 9.5 | 0.5+1.5 |
| FPM-1525 | 250 | 150 | 56 | 20 | 0.5+1.5 |
| FPM-1530 | 300 | 150 | 56 | 24 | 0.5+1.5 |
| FPM-2040 | 400 | 200 | 56 | 35 | 0.5+1.5 |
| FPM-2060 | 600 | 200 | 56 | 52 | 0.5+1.5 |
| FPM-3050 | 500 | 300 | 56 | 56 | 0.5+1.5 |
| FPM-3060 | 600 | 300 | 56 | 67 | 0.5+1.5 |
5-sided machining is possible in one clamp
Energy saving, no electric power supply during clamping
Workpieces larger than table surface are machinable
Reduced consumption of tools
Improved finishing and greater accuracies
More convenient and high efficiency
Grinding
EDM (electric discharge machining)
Drilling
Standard Accessories—
1 set of FPM chuck
2 side stopper
2 pcs of chuck clamps
1 allen wrench
Instruction manual
Quality report
Option accessories—
Pole extensions
Customized poles pitch
