SMS series is a perfect solution for angle surface grinder. The sine-base of magnetic chuck could adjust from 0~60 degree.
Pole pitch：0.5+1.5mm
Holding force: 100N/cm2
Magnetic field depth：8mm
Wearing limit: 6mm
Angle precision 0.007/100mm
Permanent magnetic chuck have a standard option of allen wrench and 2 chuck clamps. It could be easily installed on the machine worktable with screws.
MAG: Switch the wrench 180 degree from “OFF” to “ON” phase, and workpieces could be hold by invisible but powerful magnetic force. Copper stopper on 2 sides could help to prevent workpiece from sliding on the chuck.
DEMAG: Switch the wrench 180 degree from “ON” to “OFF” phase, and workpieces could be released.
| Model | Length (mm) | Width (mm) | Thickness (mm) | Angle | Weight (kg) | Pole pitch (mm) |
|---|---|---|---|---|---|---|
| SMS-1018 | 180 | 100 | 48 | 0~60° | 14 | 0.5+1.5 |
| SMS-1515 | 150 | 150 | 48 | 0~60° | 15 | 0.5+1.5 |
| SMS-1530 | 300 | 150 | 48 | 0~60° | 32 | 0.5+1.5 |
| SMS-12525 | 250 | 125 | 56 | 0~60° | 19.5 | 0.5+1.5 |
Precise adjustment of the tilt angle using the sinus-table by means of gauge blocks
Multi sides processing with only one side clamped
Energy saving, no electric power supply during clamping
Workpieces larger than table surface are machinable
Reduced consumption of tools
Improved finishing and greater accuracies
More convenient and high efficiency
Milling
Grinding
Boring
Drilling
Standard Accessories—
1 set of PPM chuck
2 side stopper
2 pcs of chuck clamps
1 allen wrench
Instruction manual
Quality report
Option accessories—
Pole extensions
Customized poles pitch
